What exactly occurs when the logger is armed?

Modified on Mon, 14 Oct at 6:34 PM

What exactly occurs when the logger is armed?

When the logger is armed, the first thing that occurs is the reader puts the IC into BAP mode using the select command. After that, the reader must write the UTC into the memory. Once the UTC is written, the IC exits BAP mode to preserve battery. If the UTC goes unwritten after the IC has been put into BAP mode, the IC will remain in BAP mode and rapidly drain the battery. You must use the select command to put the IC into BAP mode, then conclude the process by configuring and writing the UTC.