In what sequence of events does BAP mode occur?

Modified on Mon, 14 Oct at 6:35 PM

In what sequence of events does BAP mode occur?

First when the logger gets armed, it briefly goes into the BAP mode and then within a few seconds it gets out of the BAP mode. The minimum time is 1 sec, and maximum time is 32 sec. This number is configurable using Address 0x04F from LSB to the 4th bit. Every logging cycle (whatever time you set the Logger to be logging) the logger is in BAP mode, but while it is in BAP mode and during this time period (of logging the data), the reader can NOT communicate with the IC. We have shut down the RF communication path during the logging period. When the reader puts the IC in the BAP mode. In this mode the IC will be able to communicate in BAP mode. Even in this mode, the IC will have a timeout of the BAP mode to ensure the battery does not get consumed.