What parameters allow the On-Chip RSSI measurement to be performed using a SELECT command?

Modified on Tue, 15 Oct at 12:28 PM

What parameters allow the On-Chip RSSI measurement to be performed using a SELECT command?


The parameters are as follows: Memory Bank: 3ₕ (User), Bit Pointer: D0ₕ, Length: 8ₕ, Mask: 1F. A delay of at least 200 microseconds between the end of the SELECT command and the start of the next command is required while maintaining RF power. 

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article